240/415V CE TUV marked RCCB Residual Current Circuit Breaker

1.240/415V Residual Current Circuit Breaker 2.3P+N 3.Rated Residual Operating Current:30mA 4.CE/TUV marked 5.IEC61008

    240/415V RCCB Residual Current Circuit Breaker   

Specifications

1. General

The SGID series residual current circuit breaker is suitable for circuit of AC 50/60HZ, rated voltage 240/415V, rated current 16-63A. RCCBs are designed to disconnect quickly enough to prevent injury  from fault current. It can also be used for infrequent switching and starting of motor. This product is suitable for TN-S, TN-C, TT and IT network systems.

2. Technical data

Number of Poles	1P+N,3P+N
Rated Current (A)	16,20,25,40,50,63
Rated Residual Operating Current(In)(mA)	30,100,300,500
Rated Voltage(V)	AC230/240
	AC400/415
Residual Operating Current Scope	0.5In--1In
Rated Current Off-time	<= 0.3S
Short circuit capacity (Icu)	6000A
Endurance	4000
Protection Degree	lP20

Normal operation and mounting requirement

Circumstance temperature -5°C ~ +40°C, average temperature not exceeding 35°C.Altitude above sea level less than 2000 m.Humidity not exceeding 50% at 40°C and not exceeding 90% at 25°C.Installation class II or III.Pollution class II.Installation method DIN Rail mounting type.The external magnetism shall not be more than 5 times of terrestrial one. Product shall be installed vertically at the place where there shall be no severe impact and vibration.  The product is switched on when the handle is at upper position.

Selection

Here are some items for your reference when selecting the device

The earthing systems(TNS,TNC)Short-circuit of the specific power system, which must always be less than the breaking capacity of this deviceThe rated voltage Tripping curves:

B curve (3-5In) ---- protection for people and big length cables in TN and IT systems (lights or socket circuits etc.)

C curve (5-10In) ---- protection for resistant and inductive loads with low inrush current (groups of bulbs, motors etc)

D curve (10-14In) ---- protection for circuits with high inrush current (transformers, double-pole motors, motors with heavy start etc)

                                                                                                                                                                                                                                                                                                              

Any details needed, please contact us.

3. Detail pictures of   240/415V RCCB Residual Current Circuit Breaker 

  

Mounting Dimention

4. Our advantage

Safe and rapid connection of the feeder cables due to the possibility of relocating the busbars to the backIdentical terminals at the both sides for an optional infeed from the top or the bottom No tool required for mounting or dismounting Supports a fast and comfortable removal from the assembly Separate switch position indicationMultiple models for your choiceProfessional manufacture for 20 years

5. Ordering information

When ordering our products, please kindly indicate the following items:

Types and names of the products, as SG420;Number of poles, as 2P;Tripping type and rated current , as C20;Amount on order, as 200 units;Example for ordering: 200 units of the SG420 series miniature circuit breaker, 2P, C20.

 6. Certification and Package

7. The factory

Advanced assembly line

The latest professional equipment

Other products

Air Circuit  Breaker

Residual Current Circuit Breaker      

Earth Leakage Circuit Breaker

Moulded Case Circuit Breaker (MCCB)

Intelligent type Automatic Transfer Switch

Ground-fault Circuit Interrupters

Intelligent Low-voltage Combination Switch    

  .......

CONTACT US 

Chris    TEL: 86-577-61513377    FAX:86-57761513378

240/415V CE TUV marked RCCB Residual Current Circuit Breaker